Overview
HUXI RWD100E/20030053 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts an overhead design, which is capable of high load, long-term continuous work, and has automatic protection function for overload and abnormal conditions to ensure experimental safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device mixes medium and high viscosity liquids by driving the Impeller swirl/spin motor. The motor has a soft start function to ensure smooth operation. The instrument guarantees the safety of the experimental process through a closed case and an automatic protection mechanism.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. According to the characteristics of the liquid to be stirred, select the appropriate Impeller and install it.
2. Install the stirring rod through the penetration hole on the instrument and adjust it to the appropriate position.
3. Turn on the power and set the required Rotation speed through the LED screen and the speed control knob.
4. Start the equipment and start stirring. Rotation speed can be adjusted as needed during operation.
5. After stirring is complete, turn off the power, remove the Impeller, and clean it.
Notice
● Power supply voltage in 100-240VAC range. Frequency 50/60Hz.
● The instrument should be used under the conditions of Ambient Temperature 5~ 40 ℃ and relative humidity ≤ 80%.
● Impeller clamping diameter range is 0.5~ 10mm, do not use beyond the range.
● The instrument has overload and abnormal protection functions. When triggered, it will issue a sound prompt and automatically stop. Please find out the reason before using it.
The instrument housing is a closed design, but care needs to be taken to prevent large amounts of liquid from splashing in.
Please use the non-slip pad at the bottom of the instrument to ensure stable placement.
Processing capacity is 40L, maximum viscosity is 50000mPa · s, do not exceed the limit.
