Overview
HUXI LED Top-mounted Stirrer (model: RWD100E/20030055) is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts an top-mounted design to be capable of high-load, long-term continuous work, and has automatic protection for overload and abnormal conditions to ensure experimental safety.
Features
1. Rotation speed can be coarse and fine-tuned, and can also be adjusted during operation.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed shell effectively prevents liquid from splashing in, ensuring the safety of the experiment.
4. Configure the Impeller penetration hole, no need to adjust the height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device mixes medium and high viscosity liquids by motor-driven stirring rods and blade swirl/spin. With stepless speed regulation, the user can precisely adjust the Rotation speed as needed to achieve a gentle or strong stirring effect. Its closed structure and soft start design ensure smooth and safe operation.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the mixing requirements and install it.
2. Adjust the installation position of the stirring rod through the Impeller penetration hole.
3. Turn on the power, through the LED screen and knob Rotation speed coarse and fine adjustment.
4. Start the equipment, and continue to adjust the Rotation speed as needed during operation.
Notice
• Please make sure to use it at the allowable Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• Power supply voltage range (100-240VAC) and rated Frequency (50/60HZ).
• The device has overload and abnormal protection functions. In case of audio prompt or automatic stop, please check the load.
• Use non-slip mats to ensure that the equipment is firmly placed.
• Impeller clamping diameter range is 0.5~ 10mm, please do not use beyond the range.
• Do not let liquids splash into the inside of the instrument.
• This product has no timing function.
