Overview
HUXI RWD100E/20030057 LED top-mounted Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts an top-mounted design, which is capable of high load, long-term continuous work, and has automatic overload and abnormal protection functions to ensure experimental safety.
Features
1. LED display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. The motor starts softly and runs smoothly, effectively preventing sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device mixes medium and high viscosity liquids by motor drive Impeller swirl/spin. Its soft start function ensures smooth operation and prevents splashes. The enclosed enclosure and automatic protection mechanism work together to ensure the safety and stability of the equipment under long and high load operation.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating IP42
Steps
1. According to the sample viscosity and mixing requirements, select the appropriate Impeller and install it.
2. Adjust the stirring rod to the appropriate position through the Impeller penetration hole without adjusting the overall height of the instrument.
3. Turn on the power supply, and set the coarse and fine adjustment of Rotation speed through the LED screen and knob.
4. Start the equipment, the motor soft start starts to work, and the Rotation speed can be adjusted at any time according to the needs during operation.
Notice
• Please make sure to use it at the allowable Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• Note Power supply voltage range is 100-240VAC, rated Frequency is 50/60HZ.
• Impeller clamping diameter range is 0.5~ 10mm, please do not use beyond the range.
• The device has overload and abnormal protection functions. When the protection is triggered (sound prompt and automatically stop), please check the load condition.
• Do not allow large amounts of liquid to splash into the instrument, despite the protective design of the housing.
• Please clean it promptly after use.
