Overview
HUXI LED Top-mounted Stirrer (model: RWD100E/20030087) is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts an top-mounted design, which is capable of high load, long-term continuous work, and has automatic protection function for overload and abnormal conditions to ensure experimental safety.
Features
1. Rotation speed can be coarse and fine-tuned, and can also be adjusted during operation.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed shell effectively prevents liquid from splashing in, ensuring the safety of the experiment.
4. Configure the Impeller penetration hole, no need to adjust the height of the instrument, just adjust the position of the stirring rod.
5. Provide a variety of Impellers and brackets to meet different experimental needs.
Principle
The device mixes medium to high viscosity liquids by motor-driven Impeller swirl/spin. Its enclosed housing and motor soft start design ensure smooth and safe operation, with precise control and adjustment of Rotation speed via LED screens.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the experimental requirements.
2. Fix the Impeller through the wrench chuck.
3. Use the Impeller penetration hole to adjust the installation position of the stirring rod without adjusting the height of the instrument.
4. Turn on the power, set and adjust the required Rotation speed (can be coarse or fine-tuned) through the LED screen.
5. Start the equipment to stir.
Notice
• Please ensure that it is used at Permissible Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• Note Power supply voltage range is 100-240VAC, rated Frequency is 50/60HZ.
• The equipment has overload and abnormal protection functions. In case of failure, it will issue a sound prompt and automatically stop. Please check in time.
• Use non-slip mats to ensure stable placement of the equipment.
• Impeller clamping diameter range is 0.5~ 10mm, please do not use beyond the range.
• The maximum Processing capacity of this product is 40L and the maximum viscosity is 50000mPa · s. Please do not use it beyond the limit.
