Overview
HUXI RWD100E/20030091 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product is capable of high load, long-term continuous operation, outstanding performance, and automatic overload and abnormal protection to ensure laboratory safety.
Features
1. LED display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. The motor starts softly and runs smoothly, effectively preventing sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device drives the Impeller swirl/spin through the motor to mix the liquid. The motor uses soft start technology for smooth operation. The instrument has an automatic protection function for overload and abnormal conditions. When an abnormality occurs, it will issue a sound prompt and automatically stop for safety.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the experimental requirements and install it.
2. Adjust the installation position of the stirring rod through the penetration hole on the instrument.
3. Turn on the power supply.
4. Rotation speed coarse adjustment and fine adjustment settings through LED screen and knob.
5. Start the equipment for stirring, and the Rotation speed can be adjusted as needed during operation.
Notice
• Do not use under conditions exceeding the Permissible Ambient Temperature (5~ 40 ° C) and relative humidity (80%).
• Power supply voltage in the range of 100-240VAC.
• Note that the diameter range of the drill chuck clamping is 0.5~ 10mm, please do not use beyond the range.
• The device has an overload protection function. When it sounds and stops automatically, please check the load.
• Stirrer housing is a closed design, but care needs to be taken to prevent large amounts of liquid from splashing in.
• Please use matching or recommended Impellers and brackets to ensure stable and safe operation.
