Overview
HUXI RWD100E/20030090 LED top-mounted Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts top-mounted design, which can withstand high load, long-term continuous work, and has automatic protection functions for overload and abnormal conditions to ensure experimental safety. It is mainly used in chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology and other fields.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The Stirrer uses a motor to drive the Impeller swirl/spin to mix medium and high viscosity liquids. The motor has a soft start function to ensure smooth operation. The instrument can precisely control the Rotation speed in the range of 30 to 2200rpm through stepless speed regulation to adapt to the mixing needs of liquids of different viscosity.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the sample characteristics and install it.
2. Adjust the installation position of the stirring rod through the Impeller penetration hole.
3. Turn on the power supply and set the required Rotation speed through the LED screen and speed control knob.
4. Start the equipment and start stirring.
5. Rotation speed can be adjusted at any time as needed during the mixing process.
6. After stirring is complete, turn off the power, remove the Impeller, and clean it.
Notice
• Please make sure to use it at the allowable Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• Note Power supply voltage range is 100-240VAC, rated Frequency is 50/60HZ.
• Impeller clamping diameter range is 0.5~ 10mm, please do not use beyond the range.
• The equipment has overload and motor protection functions. If it is abnormal, it will issue a sound prompt and automatically stop. Please check the cause in time.
• Use non-slip mats to ensure that the equipment is firmly placed.
Processing capacity is up to 40L, and the maximum viscosity of the liquid does not exceed 50000mPa · s.
Do not let the liquid splash into the inside of the instrument to maintain its protective performance.
