Overview
HUXI RWD100E/20030064 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product adopts LED screen display, supports Rotation speed coarse and fine adjustment, can be adjusted in operation, and has motor soft start, closed housing and other designs, can withstand high load, long-term continuous work, outstanding performance, and automatic protection of overload and abnormal conditions to ensure laboratory safety.
Features
1, LED display, Rotation speed can be coarse and fine adjustment, the instrument operation, can also adjust the Rotation speed.
2. The motor starts softly and runs smoothly, effectively preventing sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Impellers and brackets are available.
Principle
The overhead Stirrer uses a motor to drive the Impeller swirl/spin to mix medium and high viscosity liquids. Its motor has a soft start function to ensure smooth operation and prevent sample splashing. The equipment can precisely control the Rotation speed in the range of 30~ 2200rpm through stepless speed regulation to adapt to the mixing needs of liquids of different viscosity, and can be adjusted in real time during operation.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the mixing requirements and install it.
2. Adjust the installation position of the stirring rod through the Impeller penetration hole without adjusting the overall height of the instrument.
3. Turn on the power supply and set the required Rotation speed through the LED screen and speed control knob (support adjustment during operation).
4. Start the equipment and start mixing.
5. Turn off the power after the work is completed.
Notice
● Please use under Permissible Ambient Temperature (5~ 40 ℃) and relative humidity (≤ 80%).
● Before use, make sure that the Power supply voltage (100-240VAC) matches the rated Frequency (50/60HZ).
● Impeller clamping diameter range is 0.5~ 10mm, do not use beyond the range.
The equipment is equipped with overload and abnormal protection functions (sound prompt, automatic stop), and should be checked in time when prompted.
Pay attention to the non-slip pad at the bottom of the device to ensure a smooth placement.
Do not let liquids splash into the inside of the instrument to ensure safe operation.
● Processing capacity is 40L, maximum applicable viscosity is 50000mPa · s, do not exceed the limit.
