Overview
HUXI RWD100E/20030005 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It uses LED screen display, supports rough and fine adjustment of Rotation speed, can adjust Rotation speed during operation, and has motor soft start, closed splash-proof housing, automatic protection for overload and abnormal situations, etc. Outstanding performance, capable of high load, long-term continuous work, to ensure laboratory safety.
Features
1. LED display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. The motor starts softly and runs smoothly, effectively preventing sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device drives the Impeller swirl/spin through the motor to mix medium and high viscosity liquids. The stepless speed regulation mode is adopted, and the user can precisely set the Rotation speed according to the needs. The motor has a soft start function, which starts smoothly and prevents liquid from splashing. The instrument has a built-in automatic protection mechanism for overload and abnormal conditions. When an abnormality is detected, a sound prompt will be issued and automatically stopped to ensure the safety of equipment and operation.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the mixing requirements and install it.
2. Adjust the stirring rod to the appropriate height through the penetration hole on the instrument.
3. Turn on the power supply and set the rough and fine adjustment of Rotation speed through the LED screen and knob.
4, start the equipment, the motor will soft start operation, during which the Rotation speed can be adjusted at any time as needed.
5. After use, turn off the power supply and perform cleaning and maintenance.
Notice
• Please make sure to use it at the allowable Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• Note Power supply voltage range is 100-240VAC, rated Frequency is 50/60HZ.
• Impeller clamping diameter range is 0.5~ 10mm, please do not use beyond the range.
• The device has overload and abnormal protection functions. If you hear a prompt tone and stop automatically, please check the reason before using it.
Do not allow large amounts of liquid to splash into the inside of the instrument, despite the protective design of the housing.
When working continuously for a long time, please pay attention to the status of the equipment.
• Use the provided non-slip pad to ensure stable placement of the equipment.
