Overview
HUXI LED overhead Stirrer (model: RWD100E/20030066) is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts overhead design, which is capable of high load, long-term continuous work, and has automatic protection function for overload and abnormal conditions to ensure experimental safety. Mainly used in chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology and other fields.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the position of the stirring rod.
5. Provide a variety of Impellers and brackets to meet different experimental needs.
Principle
The Stirrer uses a motor to drive the stirring rod and blade swirl/spin to mix medium and high viscosity liquids in the container. The motor has a soft start function for smooth acceleration, and the rotation speed is precisely controlled by stepless speed regulation to adapt to the mixing needs of liquids of different viscosity. The closed housing and automatic protection mechanism ensure the safety and stability of the equipment under long-term high-load operation.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the experimental requirements and install it.
2. Insert the stirring rod through the penetration hole on the instrument and adjust it to the appropriate position.
3. Turn on the power and set the required Rotation speed through the LED screen and the speed control knob.
4. Start the equipment and start stirring. Rotation speed can be adjusted as needed during operation.
5. After the experiment, turn off the power, remove and clean the Impeller.
Notice
• Please make sure to use it at the allowable Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• Power supply voltage (100-240VAC) should be checked before use.
• Impeller clamping diameter range is 0.5~ 10mm, please do not use beyond the range.
• The device has overload and abnormal protection functions. If you hear a prompt tone or stop automatically, please check the load.
• Pay attention to the non-slip pad at the bottom of the instrument to ensure that the equipment is placed smoothly.
Do not let the liquid splash into the inside of the instrument to maintain its protective performance.
• Select the appropriate Impeller and Rotation speed according to the liquid viscosity (up to 50000mPa · s) and Processing capacity (up to 40L).
