Overview
HUXI LED overhead Stirrer (model RWD100E/20030074) is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product is capable of high load, long continuous operation, outstanding performance, and automatic protection for overload and abnormal conditions to ensure laboratory safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
Impeller swirl/spin is used to mix liquids. The motor has a soft start function to ensure smooth operation, and the stirring speed can be precisely controlled by stepless speed regulation to adapt to the mixing needs of liquids of different viscosity.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the characteristics of the liquid to be stirred and install it.
2. Adjust the stirring rod to the appropriate position through the Impeller penetration hole and fix it.
3. Turn on the power supply and set the required Rotation speed through the LED screen and speed control knob.
4. Start the equipment to stir.
5. Turn off the power after stirring, remove the Impeller and clean it.
Notice
● Please use under Permissible Ambient Temperature (5~ 40 ℃) and relative humidity (≤ 80%).
Please use a power supply that meets the specifications (100-240VAC, 50/60Hz).
● Impeller clamping diameter range is 0.5~ 10mm, do not use beyond the range.
The equipment is equipped with overload and motor protection functions. If there is a sound prompt and it stops automatically, please check the load.
Pay attention to the non-slip pad at the bottom of the device to ensure a smooth placement.
When cleaning, do not let liquids splash into the inside of the instrument.
● Processing capacity is 40L, maximum applicable viscosity is 50000mPa · s, do not exceed the limit.
