Overview
HUXI LED overhead Stirrer (model: RWD100E/20030035) is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts overhead design, which is capable of high load, long-term continuous work, and has automatic protection function for overload and abnormal conditions to ensure experimental safety. Mainly used in chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology and other fields.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to meet different experimental needs.
Principle
The Stirrer uses a motor to drive the Impeller swirl/spin to mix medium and high viscosity liquids. Its motor has a soft start function to ensure smooth operation. With a stepless speed control system, the user can precisely control the stirring Rotation speed to adapt to different viscosity liquids and Processing capacity. The closed housing and automatic protection mechanism together ensure the safety and stability of the equipment under long-term high-load operation.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the experimental requirements and install it.
2. Insert and fix the stirring rod through the penetrating hole on the instrument.
3. Turn on the power supply.
4. Rotation speed coarse or fine adjustment through the control panel, set the required Rotation speed.
5. Start the equipment and start stirring.
6. Rotation speed can be adjusted in real time as needed during the experiment.
7. After the experiment, turn off the power, remove and clean the Impeller.
Notice
• Please make sure to use it at the allowable Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• Before use, please confirm that the Power supply voltage (100-240VAC) matches the local power grid.
• Impeller must be firmly installed to prevent peeling at high speed swirling/spinning.
• When the equipment is running, do not put your hands or foreign objects near the swirling/spinning parts.
• Note the maximum Processing capacity (40L) and viscosity range of the equipment (maximum 50000mPa · s), do not use beyond the limit.
• If the device emits an overload prompt tone and automatically stops, please check whether the load is too large, troubleshoot and then restart.
• Keep the equipment clean to prevent liquids from splashing into the inside of the housing.
• When not in use for a long time, please disconnect the power supply.
