Overview
HUXI LED Top-mounted Stirrer (model: RWD100E/20030001) is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts an top-mounted design, which is capable of high load, long-term continuous work, and has automatic protection function for overload and abnormal conditions to ensure experimental safety.
Features
1. Rotation speed can be coarse and fine-tuned, and can also be adjusted during operation.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed shell effectively prevents liquid from splashing in, ensuring the safety of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The Stirrer mixes liquids by driving the Impeller swirl/spin motor. The motor has a soft start function for smooth acceleration and protection against sample splashing. The enclosed housing design effectively protects liquids from entering the instrument and ensures that the equipment operates in a safe environment.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the experimental requirements and install it.
2. Adjust the installation position of the stirring rod through the Impeller penetration hole.
3. Turn on the power supply and set the required Rotation speed through the LED screen and speed control knob.
4. Start the equipment, and the Rotation speed can be finely adjusted according to the needs during operation.
Notice
● Please make sure to use it at the allowable Ambient Temperature (5~ 40 ℃) and relative humidity (≤ 80%).
● Note Power supply voltage range is 100-240VAC, rated Frequency is 50/60HZ.
● Impeller clamping diameter range is 0.5~ 10mm, do not use beyond the range.
The device has overload and abnormal protection functions (sound prompt and automatic stop), please pay attention to the prompt tone when running.
Do not allow large amounts of liquid to splash into the instrument, despite the protective design of the housing.
Please confirm that the Impeller is firmly installed before use.
