Overview
HUXI RWD100E/20030037 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It uses LED screen display, has the function of coarse and fine adjustment of Rotation speed, can adjust Rotation speed during operation, and is capable of high load, long-term continuous work, outstanding performance. The product has automatic protection function for overload and abnormal conditions to ensure laboratory safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The Stirrer mixes medium to high viscosity liquids with a motor drive Impeller swirl/spin. The motor uses soft start technology for smooth operation. The instrument has an automatic protection function for overloads and abnormal situations, ensuring safety through audible prompts and automatic stops.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the mixing requirements.
2. Install the stirring rod through the Impeller penetration hole and adjust it to the appropriate position.
3. Use a wrench chuck to secure the Impeller.
4. Turn on the power supply.
5. Rotation speed coarse or fine adjustment through LED screen and knob, start stirring.
6. Rotation speed can be adjusted as needed during instrument operation.
Notice
• Do not use under conditions exceeding the Permissible Ambient Temperature (5~ 40 ° C) or relative humidity (> 80%).
• Pay attention to the diameter range of the drill chuck clamping (0.5~ 10mm), and do not use beyond the range.
• The instrument has an overload protection function. When there is a sound prompt and it stops automatically, please check the load.
• Use a closed case, but still take care to prevent large amounts of liquid from splashing in.
• Power supply voltage in 100-240VAC range.
• Please select the appropriate Impeller and Rotation speed according to the liquid viscosity (maximum 50000mPa · s) and Processing capacity (maximum 40L).
