Overview
HUXI LED Top-mounted Stirrer (model: RWD100E/20030079) is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts an top-mounted design, which is capable of high load, long-term continuous work, and has automatic protection function for overload and abnormal conditions to ensure experimental safety.
Features
1. Rotation speed can be coarse and fine-tuned, and can also be adjusted during operation.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed shell effectively prevents liquid from splashing in, ensuring the safety of the experiment.
4. Configure the Impeller penetration hole, which is easy to adjust the installation position of the stirring rod without adjusting the height of the instrument.
5. Provide a variety of Impeller and bracket options to adapt to different experimental needs.
Principle
The Stirrer mixes medium to high viscosity liquids in the container by motor-driven Impeller swirl/spin. Its soft start design smooths the mixing process and prevents splashing. The closed enclosure and automatic protection mechanism work together to ensure the safe operation of the equipment under long and high load operation.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the experimental requirements and install it.
2. Insert and fix the stirring rod through the penetrating hole on the instrument.
3. Turn on the power and set the required Rotation speed through the LED screen and the speed control knob.
4. Start the equipment and start stirring.
5. After the experiment, turn off the power, remove and clean the Impeller.
Notice
• Do not use under conditions exceeding the Permissible Ambient Temperature (5~ 40 ° C) and relative humidity (80%).
• Power supply voltage in 100-240VAC range, Frequency 50/60Hz.
• Impeller clamping diameter range is 0.5~ 10mm, please do not use beyond the range.
• The device has overload and motor protection functions. When triggered, it will issue a sound prompt and automatically stop. You need to check the cause before using it.
• Pay attention to the non-slip pad at the bottom of the instrument to ensure that the equipment is placed smoothly.
• Handle liquids with a maximum viscosity of not more than 50000mPa · s.
