Overview
HUXI RWD100E/20030004 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product is capable of high load, long-term continuous operation, outstanding performance, and automatic overload and abnormal protection to ensure laboratory safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device mixes medium to high viscosity liquids by driving the Impeller swirl/spin motor. The motor has a soft start function to ensure smooth operation and safe operation through a closed housing and automatic protection mechanism.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to your needs and install it.
2. Adjust the installation position of the stirring rod through the Impeller penetration hole.
3. Connect the power supply.
4. Rotation speed coarse or fine adjustment through LED screen and knob, the instrument can also be adjusted during operation.
5. Start the equipment to stir.
Notice
• Please make sure to use it at the allowable Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• Note Power supply voltage range is 100-240VAC, rated Frequency is 50/60HZ.
• The device has overload and abnormal protection functions. When triggered, it will issue a sound prompt and automatically stop. You need to check the cause before using it.
• Use non-slip mats to ensure stable placement of the equipment.
• Impeller needs to be fixed with matching wrench chuck.
• Do not exceed the maximum Processing capacity (40L) and maximum viscosity (50000mPa · s) limits of the device.
