Overview
HUXI RWD100E/20030006 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product is capable of high load, long-term continuous operation, outstanding performance, and automatic overload and abnormal protection to ensure laboratory safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device mixes medium to high viscosity liquids with an Impeller swirl/spin motor. The motor has a soft start function, runs smoothly, and ensures safe operation through a closed enclosure and multiple Safety protection mechanisms.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the application requirements.
2. Install the stirring rod through the Impeller penetration hole and adjust it to the appropriate position without adjusting the overall height of the instrument.
3. Use a wrench chuck to secure the Impeller.
4. Rotation speed coarse or fine adjustment through the LED screen, the instrument can also be adjusted during operation.
5. Start the device, the motor will start softly, and start mixing.
Notice
• Please ensure that it is used at Permissible Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• Note Power supply voltage range is 100-240VAC, rated Frequency is 50/60HZ.
• The device has overload and abnormal protection functions (sound prompt, automatic stop). When you hear the prompt tone or the device automatically stops, please check the load.
• Use non-slip mats to ensure stable placement of the equipment.
• Impeller clamping diameter range is 0.5~ 10mm, please do not use beyond the range.
• The equipment is suitable for liquids with a maximum viscosity of 50000mPa · s, please do not use it beyond the limit.
Do not let liquids spill into the inside of the instrument, despite the protective design of the housing.
