Overview
HUXI LED overhead Stirrer (model: RWD100E/20030048) is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product is capable of high load, long-term continuous work, outstanding performance, and automatic protection of overload and abnormal conditions to ensure laboratory safety. Mainly used in chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology and other fields.
Features
1. LED screen display, Rotation speed can be coarse and fine adjustment, the instrument can also adjust the Rotation speed.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The overhead Stirrer uses a motor to drive the Impeller swirl/spin to mix medium and high viscosity liquids. The motor has a soft start function to ensure smooth operation. The device adopts a stepless speed regulation mode, and the user can roughly adjust and fine-tune the Rotation speed through the LED screen to adapt to experiments with different viscosity and mixing requirements.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller (e.g. square anchor Impeller) according to the experimental requirements.
2. Use the Impeller penetration hole configured by the equipment to adjust the installation position of the stirring rod to a suitable height.
3. Use a wrench chuck to secure the Impeller.
4. Power on (100-240VAC, 50/60HZ).
5. Rotation speed coarse or fine adjustment settings through the LED screen.
6. Start the device and the motor will start running softly.
7. Rotation speed can be adjusted at any time as needed during operation.
Notice
• Please make sure to use it at the allowable Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• The device has an overload protection function. When triggered, there will be a sound prompt and automatically stop. Please check the cause before using it.
• Pay attention to the clamping diameter range of the Impeller (0.5~ 10mm) to ensure correct installation.
• The equipment housing is a closed design, but care should be taken to prevent large amounts of liquid from splashing in.
• Use non-slip mats to ensure that the equipment is firmly placed.
• Handle liquids with a maximum viscosity of not more than 50000mPa · s.
• When the motor protection is triggered (sound prompt, automatic stop), please check the load condition.
