Overview
HUXI RWD100E/20030083 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. This product is capable of high load, long-term continuous work, outstanding performance, and automatic overload and abnormal protection functions to ensure laboratory safety.
Features
1, LED display, Rotation speed can be coarse and fine adjustment, the instrument operation, can also adjust the Rotation speed.
2. The motor starts softly and runs smoothly, effectively preventing sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Impellers and brackets are available.
Principle
The overhead Stirrer uses a motor to drive the Impeller swirl/spin to mix liquids. The motor uses a soft start mode for smooth operation. The Impeller penetration hole design makes it easy to adjust the position of the stirring rod. The device can generate tangential, axial or radial flow, forming different degrees of turbulence and shear force to adapt to the mixing needs of liquids of different viscosity.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. According to the viscosity and other characteristics of the liquid to be mixed, select the appropriate Impeller and install it.
2. Adjust the installation position of the stirring rod through the Impeller penetration hole without adjusting the overall height of the instrument.
3, turn on the power supply, through the LED screen and speed knob Rotation speed coarse adjustment and fine adjustment settings.
4. Start the equipment, soft start the motor, and start stirring.
5. Rotation speed can be adjusted in real time as needed during the mixing process.
6. After stirring, turn off the power and remove the Impeller for cleaning.
Notice
• Please make sure to use it at the allowable Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• Before use, please confirm that the Power supply voltage (100-240VAC) matches the local power grid.
• Impeller clamping diameter range is 0.5~ 10mm, please do not use beyond the range.
• The device has overload and abnormal protection functions. When the protection is triggered (sound prompt and automatically stop), please check the load before starting.
• Pay attention to the non-slip pad at the bottom of the device to ensure that the instrument is placed smoothly.
• The enclosed case prevents liquid from splashing in, but large amounts of liquid should still be avoided from splashing directly onto the instrument.
• Do not work beyond the limits of maximum Processing capacity (40L) and maximum viscosity (50000mPa · s).
