Overview
HUXI RWD150E/20030042 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product is capable of high load, long-term continuous operation, outstanding performance, and automatic overload and abnormal protection to ensure laboratory safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The machine drives the Impeller swirl/spin to mix medium and high viscosity liquids. Soft start technology is used to ensure smooth operation, and the stirring speed is precisely controlled by stepless speed regulation to adapt to different viscosity and mixing needs.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. According to the characteristics of the mixed medium, choose the appropriate type from the three hole fan type, dissolved type, three blade type, centrifugal type, four blade type, screw type, round six hole fan type, one word type, round anchor type, square anchor type, square hole fan type and other Impellers.
2. Use the Impeller penetration hole to adjust the installation position of the stirring rod to a suitable height without adjusting the overall installation height of the instrument.
3. Use a wrench chuck to secure the Impeller.
4. Rotation speed coarse adjustment and fine adjustment setting through LED screen and speed control knob, the instrument can also be adjusted during operation.
5. Start the device, the motor will start softly, and start mixing.
Notice
● Power supply voltage 100-240VAC, rated Frequency 50/60HZ range.
● Ambient Temperature of the equipment is 5~ 40 ℃, relative humidity ≤ 80%.
● Impeller clamping diameter range is 0.5~ 10mm, do not use beyond the range.
The device has an automatic protection function for overload and abnormal conditions (sound prompt and automatic stop). Please check the cause after triggering.
● The bottom of the equipment is equipped with a non-slip pad, please place it on a stable table to operate.
● The maximum processing capacity of this product is 60L, and the maximum applicable viscosity is 80000mPa · s. Please do not use it beyond the limit.
The closed enclosure can prevent liquid from splashing in, but it is still necessary to pay attention to the operation specifications to avoid large amounts of liquid spilling.
● Clean Impeller promptly after use.
