Overview
HUXI RWD150E/20030044 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product is capable of high load, long-term continuous operation, outstanding performance, and automatic overload and abnormal protection to ensure laboratory safety.
Features
1, LED display, Rotation speed can be coarse and fine adjustment, the instrument operation, can also adjust the Rotation speed.
2. The motor starts softly and runs smoothly, effectively preventing sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Impellers and brackets are available.
Principle
The device mixes medium to high viscosity liquids by driving the Impeller swirl/spin motor. The motor uses soft start technology for smooth operation and automatic protection against overloads and abnormalities.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the sample characteristics and install it.
2. Adjust the installation position of the stirring rod through the Impeller penetration hole.
3. Turn on the power supply.
4. Rotation speed coarse and fine adjustment settings through LED screen and speed control knob.
5. Start the equipment to stir.
6. Rotation speed can be adjusted as needed during operation.
7. Turn off the power after the work is completed.
Notice
• Please make sure to use it at the allowable Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• Power supply voltage range (100-240VAC) and Frequency (50/60HZ).
• The device has overload and abnormal protection functions. When the protection is triggered (sound prompt, automatic stop), please check the reason before using it.
• Use non-slip mats to ensure stable placement of the equipment.
• The clamping diameter range of Impeller is 0.5~ 10mm, please do not use beyond the range.
• Do not exceed the maximum Processing capacity (60L) and maximum viscosity (80000mPa · s) limits of the device.
