Overview
HUXI RWD150E/20030051 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product has outstanding performance and is capable of high load, long-term continuous work, and has automatic overload and abnormal protection functions to ensure experimental safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The overhead Stirrer mixes medium to high viscosity liquids with an Impeller swirl/spin motor. The motor has a soft start function to ensure smooth operation, and stepless speed regulation precisely controls the stirring speed to adapt to different viscosity and mixing needs.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the sample viscosity and container.
2. Install the stirring rod through the Impeller penetration hole and adjust it to the appropriate position.
3. Use a wrench chuck to secure the Impeller.
4. Turn on the power supply and adjust the Rotation speed coarsely or finely through the LED screen and knob.
5. Start the equipment, and adjust the Rotation speed as needed during operation.
Notice
• Please ensure that the Ambient Temperature is used within the allowable range of 5~ 40 ° C and relative humidity ≤ 80%.
• Before use, please confirm that the Power supply voltage (100-240VAC) and Frequency (50/60HZ) meet the requirements.
• Impeller clamping diameter range is 0.5~ 10mm, please do not use beyond the range.
• The device has an overload protection function. If there is a sound prompt and it stops automatically, please check the load.
• Note that the maximum Processing capacity of the equipment is 60L and the maximum viscosity is 80000mPa · s. Please do not use it beyond the limit.
Do not let the liquid splash into the inside of the instrument to maintain its protective performance.
• The instrument base is equipped with a non-slip pad, please ensure that it is placed on a smooth countertop for operation.
