Overview
HUXI RWD150E/20030052 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product is capable of high load, long-term continuous operation, outstanding performance, and automatic overload and abnormal protection to ensure laboratory safety.
Features
1, LED display, Rotation speed can be coarse and fine adjustment, the instrument operation, can also adjust the Rotation speed.
2. The motor starts softly and runs smoothly, effectively preventing sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Impellers and brackets are available.
Principle
The overhead Stirrer mixes medium to high viscosity liquids with an Impeller swirl/spin motor. The motor has a soft start function to ensure smooth operation, and can be steplessly adjusted by coarse and fine adjustment to adapt to different viscosity and mixing requirements.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. According to the sample viscosity and mixing requirements, select the appropriate Impeller and install it.
2. Adjust the installation position of the stirring rod through the Impeller penetration hole.
3. Turn on the power supply.
4. Through the LED screen and speed control knob, set the required stirring Rotation speed (can also be adjusted during operation).
5. Start the equipment and start stirring.
Notice
• Please make sure to use it at the allowable Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• Note Power supply voltage range is 100-240VAC, rated Frequency is 50/60HZ.
• Impeller clamping diameter range is 0.5~ 10mm, please do not use beyond the range.
• The equipment has overload and abnormal protection functions (sound prompt, automatic stop), and should be checked in time when hearing the prompt tone.
• Use non-slip mats to ensure stable placement of the equipment.
• Do not let liquids splash into the inside of the instrument.
• The maximum Processing capacity of this product is 60L, and the maximum applicable viscosity is 80000mPa · s. Please do not use it beyond the limit.