Overview
HUXI LED overhead Stirrer (model: RWD150E/20030054) is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product is capable of high load, long continuous operation, outstanding performance, and automatic protection for overload and abnormal conditions to ensure laboratory safety.
Features
1. LED display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. The motor starts softly and runs smoothly, effectively preventing sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The product mixes medium and high viscosity liquids by motor drive Impeller swirl/spin. Its motor has a soft start function to ensure smooth operation. The closed case design can effectively prevent liquid splashing and protect the internal circuit. The instrument has an automatic protection function for overload and abnormal conditions. It is prompted by sound and automatically stops to ensure safe operation.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the viscosity and other characteristics of the liquid to be mixed.
2. Install the Impeller rod through the penetration hole on the instrument and fix it with a wrench chuck.
3. Turn on the power supply and set the required stirring Rotation speed through the LED screen and speed control knob.
4. Start the instrument and start stirring. Rotation speed can be adjusted at any time as needed during operation.
5. After stirring, turn off the power, remove the Impeller, and clean it.
Notice
Do not use under conditions exceeding the Permissible Ambient Temperature (5~ 40 ° C) or relative humidity (80%).
● Power supply voltage in 100-240VAC range, and match the rated Frequency (50/60HZ).
● Impeller clamping diameter range is 0.5~ 10mm, do not use beyond the range.
The instrument is equipped with an overload protection function. When an abnormality occurs (such as excessive load), it will issue a sound prompt and automatically stop. At this time, the cause should be checked and troubleshooted before use.
When the instrument is running, make sure it is placed smoothly and use its anti-skid pad design to prevent sliding.
When cleaning the instrument, please disconnect the power supply to prevent liquids from entering the instrument.
● Please use it reasonably according to the Processing capacity (maximum 60L) and the maximum viscosity of the liquid (80000mPa · s) to avoid overload operation.
