Overview
HUXI LED Stirrer (model: RWD150E/20030055) is a laboratory equipment suitable for mixing medium and high viscosity liquids. It uses an overhead design to be capable of high load, long-term continuous work, outstanding performance, and automatic overload and abnormal protection to ensure experimental safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the position of the stirring rod.
5. Provide a variety of Impeller and bracket options to adapt to different experimental needs.
Principle
The Stirrer mixes medium to high viscosity liquids in the container by means of a motor-driven stirring rod and swirl/spin blades. Its closed housing and motor soft start design ensure smooth and safe operation, while the through hole design facilitates the installation and height adjustment of the stirring rod.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the experimental requirements and install it.
2. Insert and fix the stirring rod through the penetration hole at the bottom of the instrument.
3. Turn on the power and set the required Rotation speed (can be coarse or fine adjusted) through the LED screen and knob.
4. Start the device and start stirring after the motor soft starts.
5. Rotation speed can be adjusted at any time as needed during the experiment.
6. After the experiment, turn off the power, remove and clean the Impeller.
Notice
• Please make sure to use it at the allowable Ambient Temperature (5~ 40 ° C) and relative humidity (≤ 80%).
• Before use, please confirm that the Power supply voltage (100-240VAC) and Frequency (50/60HZ) meet the requirements.
• Impeller clamping diameter range is 0.5~ 10mm, please do not use beyond the range.
• The device has an overload protection function. If you hear a prompt tone and stop automatically, please check the load.
• Pay attention to the non-slip pad at the bottom of the instrument to ensure that the equipment is placed smoothly.
Do not let liquids splash into the inside of the instrument to ensure safety and equipment life.
