Overview
HUXI RWD150E/20030057 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It is capable of high load, long continuous operation, outstanding performance, and automatic overload and abnormal protection to ensure laboratory safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device mixes medium to high viscosity liquids with motor drive Impeller swirl/spin. Its enclosed housing and motor soft start design ensure smooth and safe operation, with precise Rotation speed control and adjustment via LED screens.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. According to the characteristics of the liquid to be mixed, select the appropriate Impeller and install it.
2. Adjust the stirring rod to the appropriate height through the Impeller penetration hole and fix it.
3. Turn on the power supply.
4. Rotation speed is set by the coarse and fine adjustment functions on the LED screen.
5. Start the equipment and start stirring.
6. Rotation speed can be adjusted in real time as needed during the mixing process.
7. After stirring is complete, turn off the power, remove the Impeller, and clean it.
Notice
• Do not use under conditions exceeding the Permissible Ambient Temperature (5~ 40 ° C) and relative humidity (80%).
• Power supply voltage within 100-240VAC range before use.
• Impeller clamping diameter range is 0.5~ 10mm, please do not use beyond the range.
• The equipment has overload and motor protection functions. When it sounds and stops automatically, please check the load condition.
• Pay attention to the non-slip pad at the bottom of the device to ensure that it is placed smoothly.
• There are many types of Impeller, please choose the appropriate Impeller according to the liquid viscosity (maximum 80000mPa · s) and mixing requirements.
When cleaning, avoid liquids entering the equipment.
