Overview
HUXI RWD150E/20030088 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product is capable of high load, long-term continuous operation, outstanding performance, and automatic overload and abnormal protection to ensure laboratory safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The overhead Stirrer mixes medium to high viscosity liquids with an Impeller swirl/spin motor. The motor has a soft start function to ensure smooth operation. The instrument is safe to operate with a closed case and an automatic protection mechanism.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the sample characteristics.
2. Install the stirring rod through the Impeller penetration hole and adjust it to the appropriate position.
3. Turn on the power supply.
4. Set the required Rotation speed (can be coarsely or finely adjusted) through the LED screen and speed control knob.
5. Start the equipment to stir.
6. After the experiment, turn off the power, remove the Impeller, and clean it.
Notice
Do not use under conditions exceeding the Permissible Ambient Temperature (5~ 40 ° C) and relative humidity (80%).
● Power supply voltage in the range of 100-240VAC.
● Drill chuck clamping diameter range is 0.5~ 10mm, do not use beyond the range.
The device has overload and abnormal protection functions. If you hear a sound prompt or the device automatically stops, please check the load.
● Use non-slip pads to ensure stable placement of the equipment.
● Impeller fixation requires matching wrench chuck.
Handle liquids with a maximum viscosity not exceeding 80000mPa · s.
This product is suitable for mixing medium and high viscosity liquids. Please select the appropriate Impeller type according to the application scenario.
