Overview
HUXI RWD150E/20030002 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product is capable of high load, long-term continuous operation, outstanding performance, and automatic overload and abnormal protection to ensure laboratory safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The overhead Stirrer mixes medium to high viscosity liquids with an Impeller swirl/spin motor. The motor has a soft start function to ensure smooth operation, and can precisely control the stirring speed through stepless speed regulation to adapt to different viscosity and mixing needs.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the sample viscosity and container.
2. Secure the Impeller to the Stirrer drill chuck through the wrench chuck.
3. Use the Impeller to penetrate the hole and adjust the stirring rod to the appropriate height without adjusting the overall height of the instrument.
4. Turn on the power supply and set the required Rotation speed (can be coarsely or finely adjusted) through the LED screen and the speed control knob.
5. Start the device and start stirring after the motor soft starts.
6. Rotation speed can be adjusted in real time as needed during the mixing process.
7. Turn off the power after stirring, remove the Impeller and clean it.
Notice
• Please use under Permissible Ambient Temperature (5~ 40 ℃) and relative humidity (≤ 80%).
• Power supply voltage (100-240VAC, 50/60HZ).
• Impeller clamping diameter should be within 0.5~ 10mm.
• Note the maximum Processing capacity (60L) and maximum viscosity (80000mPa · s) limits of the equipment.
• The device has overload and abnormal protection functions. When the protection is triggered (sound prompt, automatic stop), please check the load condition.
• Use non-slip pads to ensure stable placement of the equipment.
• The enclosed enclosure can prevent liquid splashing, but it is still necessary to avoid large amounts of liquid splashing.
• Please choose the appropriate type from a variety of optional Impellers (such as three hole fan type, dissolving type, three blade type, etc.) according to the application requirements.
