Overview
HUXI LED Stirrer (model: RWD150E/20030094) is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product has outstanding performance and is capable of high load, long-term continuous work, and has automatic protection function for overload and abnormal conditions to ensure experimental safety. It is mainly used in chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology and other fields.
Features
1. LED display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. The motor starts softly and runs smoothly, effectively preventing sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device uses a motor to drive the Impeller swirl/spin to mix medium and high viscosity liquids. The motor has a soft start function for a smooth start, and the Impeller Rotation speed is precisely controlled by stepless speed regulation to adapt to different viscosity liquids and processing needs.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. According to the characteristics of the liquid to be stirred, select the appropriate Impeller and install it.
2. Insert and fix the stirring rod through the penetration hole at the bottom of the instrument.
3. Turn on the power supply and set the required Rotation speed through the coarse and fine adjustment knobs on the control panel.
4. Start the equipment, and the Rotation speed can be adjusted in real time according to the needs during the stirring process.
Notice
● Power supply voltage is within 100-240VAC range before use.
● The instrument should operate under the conditions of Ambient Temperature 5~ 40 ℃ and relative humidity ≤ 80%.
● Note that the clamping diameter range of the Impeller is 0.5 to 10mm, do not use beyond the range.
The equipment is equipped with an overload protection function. When an overload or abnormality occurs, it will issue a sound prompt and automatically stop. At this time, the load should be checked.
Do not let liquids splash into the inside of the instrument to ensure the safety and lifespan of the equipment.
● The instrument base is equipped with a non-slip pad, please place it on a stable countertop for operation.
