Overview
HUXI LED Top-mounted Stirrer (model: RWD150E/20030038) is a laboratory equipment suitable for mixing medium and high viscosity liquids. It features an top-mounted design for high-load, long-term continuous work, outstanding performance, and automatic overload and abnormal protection to ensure laboratory safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The Stirrer mixes medium to high viscosity liquids with a motor-driven Impeller swirl/spin. Its enclosed housing and soft start design ensure smooth and safe operation, while a variety of optional Impeller types can generate tangential, axial or radial flow for different viscosity and mixing needs for efficient, gentle or high shear force mixing.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the characteristics of the liquid to be stirred (e.g. viscosity).
2. Install the stirring rod through the Impeller penetration hole and adjust it to the appropriate position without adjusting the overall height of the instrument.
3. Use a wrench chuck to secure the Impeller.
4. Turn on the power supply and set the required Rotation speed (can be coarsely or finely adjusted) through the LED screen and speed control knob.
5. Start the device, soft start the motor, and start stirring.
6. Rotation speed can be adjusted at any time as needed during the mixing process.
7. Turn off the power after stirring.
Notice
• Do not use under conditions exceeding the Permissible Ambient Temperature (5~ 40 ° C) or relative humidity (80%).
• Power supply voltage in 100-240VAC range, Frequency 50/60Hz.
• Impeller clamping diameter range is 0.5~ 10mm, please do not use beyond the range.
• The device has overload and abnormal protection functions (sound prompt and automatic stop). If it is triggered, please check the load and troubleshoot before use.
• Pay attention to the non-slip pad at the bottom of the device to ensure smooth placement.
Processing capacity up to 60L, liquid viscosity up to 80000mPa · s, do not exceed the limit.
• Please clean it promptly after use.
