Overview
HUXI RWD150E/20030079 LED overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids, mainly used in chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology and other fields. The product is capable of high load, long-term continuous work, outstanding performance, and automatic protection of overloads and abnormal situations to ensure laboratory safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The overhead Stirrer mixes medium and high viscosity liquids in the container by means of a motor driving the stirring rod and the blade swirl/spin. The motor uses soft start technology to ensure smooth operation. The equipment has an automatic protection function for overloads and abnormal situations, and is guaranteed by audible prompts and automatic stops.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the experimental requirements and install it.
2. Install the stirring rod through the penetrating hole to the appropriate height.
3. Turn on the power supply.
4. Set the required Rotation speed through the LED screen and knob (coarse or fine adjustment).
5. Start the equipment, and adjust the Rotation speed as needed during operation.
Notice
Do not use under conditions exceeding the Permissible Ambient Temperature (5~ 40 ° C) and relative humidity (80%).
● Power supply voltage is within 100-240VAC range before use.
● Pay attention to the diameter range of the drill chuck clamping (0.5~ 10mm), and do not use it beyond the range.
The device has an overload protection function. When it sounds and stops automatically, please check the load.
Please use the non-slip pad at the bottom of the device to ensure stable placement.
● Impeller needs to use matching wrench for chuck fixing to ensure firm installation.
