Overview
HUXI LED overhead Stirrer (model: RWD150E/20030004) is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product is capable of high load, long continuous operation, outstanding performance, and automatic protection for overload and abnormal conditions to ensure laboratory safety.
Features
1. LED screen display, Rotation speed can be coarse and fine-tuned, and Rotation speed can also be adjusted during the operation of the instrument.
2. Motor soft start, smooth operation, effectively prevent sample overflow.
3. The closed enclosure effectively prevents liquid from splashing into the instrument, ensuring the safe operation of the experiment.
4. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the position of the stirring rod.
5. Provide a variety of Impellers and brackets to choose from.
Principle
The device mixes medium to high viscosity liquids by driving the Impeller swirl/spin motor. The motor has a soft start function to ensure smooth operation and is equipped with an automatic protection mechanism for overloads and abnormal situations.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Standards
Protection Rating: IP42
Steps
1. Select the appropriate Impeller according to the characteristics of the liquid to be mixed.
2. Install the stirring rod through the Impeller penetration hole and adjust it to the appropriate position.
3. Use a wrench chuck to secure the Impeller.
4. Turn on the power supply and set the required Rotation speed through the LED screen and speed control knob.
5. Start the equipment, and the Rotation speed can be finely adjusted according to the needs during operation.
6. After the experiment, turn off the power and clean the equipment.
Notice
• Please ensure that the Ambient Temperature is used within the allowable range of 5~ 40 ° C and relative humidity ≤ 80%.
• Before use, please confirm that the Power supply voltage (100-240VAC) and Frequency (50/60HZ) meet the requirements.
• Impeller clamping diameter range is 0.5~ 10mm, please do not use beyond the range.
• The device has an overload protection function. When it sounds and stops automatically, please check the load.
• Note that the maximum Processing capacity of the equipment is 60L and the maximum viscosity is 80000mPa · s. Please do not use it beyond the limit.
• When cleaning, please note that the Protection Rating is IP42 to avoid a large amount of liquid splashing.
• Please use the non-slip pad provided by the product to ensure that the equipment is placed stably.