Overview
HAOXINDA MP-2B Metallographic polish-grinding machine is a key equipment in the preparation process of metallographic samples. It is used for the polishing and polishing process of the samples, and a mirror-like surface can be obtained. The equipment uses a frequency converter to adjust the speed, and the Rotation speed of the grinding and polishing disc is infinitely adjustable between 50-1000rpm. The grinding and polishing machine is completed by changing the metallographic sandpaper and polishing fabric. The double-disc design supports two people to operate at the same time. The overall blister technology of the shell has a novel appearance. It has the characteristics of smooth rotation, low noise, convenient operation and high work efficiency. It also has its own chill down device to prevent the sample from overheating and destroying the metallographic structure. It is suitable for metallographic laboratories of factories, Universities & colleges, and R & D institutions.
Features
1. The shell adopts high-end ABS integrated molding, Appearance is novel, high-end atmosphere and grade.
2. The faucet adopts all-copper chrome plating process, which has good corrosion resistance.
3. Stepless speed regulation, convenient and fast to meet a variety of needs.
4. Double-disc design makes sample preparation more efficient.
5. The grinding plate can be swirled/spun clockwise or counterclockwise to adapt to different needs.
Principle
MP-2B Metallographic polish-grinding machine controls the grinding and polishing disc in the range of 50-1000rpm stepless speed swirl/spin through the frequency converter, combines metallographic sandpaper and polishing fabric to polish and polish the sample, and has its own chill down device to chill down the sample during the grinding and polishing process to prevent overheating from damaging the metallographic structure.
Applications
Universities & colleges, R & D institutions
Steps
1. Connect the power supply to ensure that the voltage is 220V and the Frequency is 50HZ.
2, according to the need to set the grinding disc Rotation speed between 50-1000rpm.
3. Select metallographic sandpaper or polished fabric and install it on the polishing plate.
4, start the equipment, grinding plate can be clockwise or counterclockwise swirl/spin.
5. Place the sample on a grinding disc for polishing or polishing.
6. Use the built-in chill down device to chill down the sample.
7. Turn off the device after the operation is completed.
Notice
• Power supply voltage 220V and Frequency 50HZ before operation.
• Rotation speed should be adjusted within the range of 50-1000rpm.
• Use appropriate metallographic sandpaper and polished fabric.
• Note that the specimen is chilled down to prevent overheating from damaging the metallographic structure.
• Device weight is 42Kg, be careful when handling.
• Keep equipment clean and check faucets and other components regularly.
