Overview
HUXI LCD Top Stirrer (model RWD50/20030055/20030012) is a laboratory equipment suitable for mixing medium and high viscosity liquids. The product features an LCD display with Rotation speed and time adjustment, which is capable of high load, long-term continuous work, outstanding performance, and is equipped with automatic overload and abnormal situation protection function to ensure laboratory safety.
Features
1. LCD screen display, Rotation speed and time can be roughly adjusted, Working time can be fine-tuned under working conditions
2. Speed range 30-2200rpm, constant Rotation speed, high and low speed controllable
3. Adopt brushless DC motor for long-term safe operation
4. Overload and motor protection, if there is an abnormality, automatically cut off the circuit and alarm
5. Configure Impeller penetration hole, no need to adjust the installation height of the instrument
6. The torque can be automatically adjusted according to the sample viscosity
7. Multiple Impellers and Bracket Available
Principle
The Stirrer drives the Impeller swirl/spin with a brushless DC motor to achieve mixing of solid-liquid, liquid-liquid or medium and high viscosity samples. The Impeller is fixed with a self-locking chuck, and the Rotation speed is controlled by stepless speed regulation. The torque can be automatically adjusted according to the change of sample viscosity to ensure the mixing effect.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1. Select the right Impeller and install it
2. Adjust the installation position of the stirring rod
3. Rotation speed and time parameters
4. Start Stirrer for mixing operations
5. Monitor operating status and fine-tune parameters if necessary
Notice
• Before use, please confirm that the Power supply voltage meets the requirements (100-240VAC)
• Ambient Temperature should be within 5~ 40 ℃
• relative humidity should not exceed 80%
• Pay attention to the overload protection function, and deal with the fault display in time
• Use non-slip mats to ensure equipment stability
• Select the appropriate Impeller type based on sample viscosity
