Overview
HUXI LCD top-mounted Stirrer (model RWD50/20030083/20030012) is a high-end laboratory equipment suitable for mixing medium and high viscosity liquids. The product adopts LCD display screen, with automatic protection function for overload and abnormal conditions, can be capable of high load and long-term continuous work to ensure laboratory safety. It is mainly used in chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology and other fields.
Features
1. LCD screen display, Rotation speed and time can be roughly adjusted, Working time can be fine-tuned under working conditions
2. Rotation speed 30-2200rpm, can be constant Rotation speed, high and low speed controllable
3. Adopt brushless DC motor for long-term safe operation
4. Overload and motor protection, if there is an abnormality, automatically cut off the circuit and alarm
5. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument
6. The torque can be automatically adjusted according to the change of sample viscosity
7. Multiple Impellers and Bracket Available
Principle
The LCD top-mounted Stirrer drives the Impeller swirl/spin with a brushless DC motor to achieve mixing of solid-liquid, liquid-liquid or medium to high viscosity samples. The Impeller is fixed with a self-locking chuck, and the torque can be automatically adjusted according to the sample viscosity to ensure mixing effect and safe operation.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1. Select the appropriate Impeller and install to the self-locking chuck
2. Rotation speed and time parameters set by LCD screen
3. Stirrer starts working
4. Time can be fine-tuned during the work process
5. Turn off the equipment after mixing
Notice
• Power supply voltage within 100-240VAC range before use
• Ambient Temperature should be maintained at 5-40 ℃
• The relative humidity should not exceed 80%
• Pay attention to the overload protection function, it will automatically stop if there is an abnormality.
• Select the right Impeller to suit different viscosity samples
• Regularly check the chuck protective cover and non-slip pad
• Avoid use under conditions exceeding the maximum viscosity of 10000mPa · s
