Overview
HUXI LCD top-mounted Stirrer is suitable for mixing medium and high viscosity liquids, which is more high-end and safer than LED series. It adopts self-locking chuck and self-developed Cube lifting and fixing clip for mixing solid-liquid, liquid-liquid or medium and high viscosity samples. The product is capable of high load, long-term continuous work, outstanding performance, automatic protection of overload and abnormal conditions, ensuring laboratory safety.
Features
1. LCD screen display, Rotation speed and time can be roughly adjusted, Working time can be fine-tuned under working conditions
2. Rotation speed 30-2200rpm, can be constant Rotation speed, high and low speed controllable
3. DC brushless motor, long-term safe operation, outstanding performance
4. Overload and motor protection, automatically cut off the circuit and alarm in the event of overload, short circuit or abnormality
5. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument, just adjust the installation position of the stirring rod
6. The torque can be automatically adjusted according to the change of sample viscosity, which is convenient for experimental operation
7. Various Impellers and Bracket Options
Principle
The Stirrer drives the Impeller swirl/spin through a brushless DC motor to achieve mixing of medium and high viscosity liquids. With stepless speed regulation, the torque can be automatically adjusted according to the viscosity of the sample to ensure the mixing effect. With automatic protection function, it automatically stops working in case of overload or abnormal conditions to ensure experimental safety.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1. Choose the Right Impeller Type
2. Impeller fixed by self-locking chuck
3. Rotation speed and time parameters
4. Stirrer starts working
5. Working time can be fine-tuned as needed during the working process
6. Turn off the equipment after mixing
Notice
• Before use, please check whether the Power supply voltage meets the requirements (100-240VAC)
• Ambient Temperature should be kept within 5~ 40 ℃
• The relative humidity should not exceed 80%
• Pay attention to the clamping diameter range of the Impeller (0.5~ 10mm)
• Stop using it immediately when there is a fault display
• Use matching chuck protective cover and non-slip pad to ensure safety
• Select the appropriate Impeller type based on sample viscosity
• Avoid overloading for long periods of time
