Overview
HUXI LCD top-mounted Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids, which is more high-end and safe than LED series. It adopts self-locking chuck and self-developed Cube lifting and fixing clip, which can handle high load and long-term continuous work. It has automatic protection function for overload and abnormal conditions to ensure laboratory safety.
Features
1. LCD screen display, Rotation speed and time can be roughly adjusted, Working time can be fine-tuned under working conditions
2. Rotation speed 30-2200rpm, can be constant Rotation speed, high and low speed controllable
3, using brushless DC motor, long-term safe operation, outstanding performance
4. Overload and motor protection, abnormal automatic circuit cut and alarm
5. Configure the Impeller penetration hole, the user does not need to adjust the installation height of the instrument
6, torque can be automatically adjusted according to sample viscosity changes
7. Multiple Impellers and Bracket Available
Principle
The Impeller swirl/spin is driven by a brushless DC motor to achieve mixing of medium and high viscosity liquids. With stepless speed regulation, the torque can be automatically adjusted according to the viscosity of the sample to ensure the mixing effect.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1 Choose the Right Impeller
2. Install Impeller to Self-locking Chuck
3. Rotation speed and time parameters are set through the LCD screen
4. Start the equipment for mixing operation
5. Parameters can be fine-tuned during operation
Notice
● Power supply voltage within 100-240VAC range before use
● Ambient Temperature should be kept between 5-40 ℃
● relative humidity should not exceed 80%
● Pay attention to the installation position of the Impeller and avoid adjusting the height of the instrument
The device will automatically stop and alarm when overload or abnormality occurs
● Use matching chuck protective cover and non-slip pad to ensure safety
● Select the appropriate Impeller type based on sample viscosity
