Overview
HUXI LCD top-mounted Stirrer (model RWD100/20030050/20030012) is a powerful electric mixing equipment suitable for mixing medium and high viscosity liquids. The product uses an LCD display screen with automatic overload and abnormal protection functions, which can handle high loads and long-term continuous work. Outstanding performance ensures laboratory safety.
Features
1. LCD screen display, Rotation speed and time can be coarsely adjusted, Working time can be fine-tuned under working conditions
2. Speed range 30-2200rpm, constant Rotation speed, high and low speed controllable
3. Adopt brushless DC motor for long-term safe operation
4. Overload and motor protection, if there is an abnormality, automatically cut off the circuit and alarm
5. Configure Impeller penetration hole, no need to adjust the installation height of the instrument
6. The torque can be automatically adjusted according to the sample viscosity
7. Multiple Impellers and Bracket Available
Principle
The Stirrer drives the Impeller swirl/spin with a brushless DC motor to mix solid-liquid, liquid-liquid or medium to high viscosity samples. The Impeller is fixed with a self-locking chuck, and the torque can be automatically adjusted according to the change of sample viscosity to ensure the mixing effect.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1. Choose the Right Impeller
2. Impeller fixed by self-locking chuck
3. Rotation speed and Working time
4. Start Stirrer for mixing operations
5. Turn off the device after the work is completed
Notice
• Before use, please check whether the Power supply voltage meets the requirements (100-240VAC)
• Ensure that the Ambient Temperature is within the range of 5-40 ° C
• The relative humidity should not exceed 80%
• Pay attention to the use of chuck protective cover and non-slip pad
• The device will automatically stop and alarm when there is an overload or abnormality
• Do not exceed the maximum viscosity of 50000mPa · s
• Impeller clamping diameter range is 0.5~ 10mm
