Overview
HUXI LCD overhead Stirrer is a laboratory equipment suitable for mixing medium and high viscosity liquids. It adopts self-locking chuck and self-developed Cube lifting fixed clip design. The product is capable of high load and long-term continuous work. It has automatic protection function for overload and abnormal conditions to ensure laboratory safety. Mainly used in chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology and other fields.
Features
1. LCD screen display, Rotation speed and time can be roughly adjusted, Working time can be fine-tuned under working conditions
2. Speed range 30-2200rpm, constant Rotation speed, high and low speed controllable
3. Adopt brushless DC motor for long-term safe operation
4. Overload and motor protection, if there is an abnormality, automatically cut off the circuit and alarm
5. Configure Impeller penetration hole for easy installation and adjustment
6. The torque can be automatically adjusted according to the sample viscosity
7. Multiple Impellers and Bracket Available
Principle
The Stirrer drives the Impeller swirl/spin with a brushless DC motor to mix solid-liquid, liquid-liquid or medium to high viscosity samples. With stepless speed regulation, the torque can be automatically adjusted according to the change of sample viscosity to ensure the mixing effect.
Applications
Chemical synthesis, physical and chemical analysis, petrochemical, cosmetics, health products, food, biotechnology
Steps
1. Choose the Right Impeller
2. Impeller fixed by self-locking chuck
3. Adjust the installation position of the stirring rod
4. Rotation speed and Working time
5. Start Stirrer for mixing operations
Notice
• Before use, please check whether the Power supply voltage meets the requirements
• Please ensure that the Ambient Temperature is within the range of 5-40 ° C during operation
• The relative humidity should not exceed 80%
• The device will automatically stop and alarm when there is an overload or abnormality
• Do not use under conditions exceeding the maximum viscosity of 80000mPa · s
The clamping diameter should be controlled between 0.5-10 mm
• Regularly check whether the equipment Safety protection device is in good condition
