Overview
The HJQ-2 pneumatic Stirrer is a power device that uses a good pneumatic motor to use compressed air as the driving force of the working medium, uses the expansion of compressed gas to convert pressure energy into mechanical energy, so as to realize the stirring and mixing of samples in the experimental environment, etc., especially suitable for stirring paints, chemicals, solvents, etc. with flammable and explosive substances or high temperature environments.
Features
1. Small Size, High Power, Safe and Light Operation
2. With high rotational torque, it can be started with load
3. Standard pressure gauge, you can check the pressure value at any time
4. Imported self-locking chuck with self-locking function, high concentricity and long service life
5. Cube lifting fixed clip adopts double hole mode, the height can be adjusted arbitrarily, the clamping is stable, and the operation is more stable
6. The whole machine adopts explosion-proof, no spark, no static electricity good pneumatic motor, safe operation, not easily affected by external environmental factors
7. Impellers of various specifications are available
Principle
The HJQ-2 pneumatic Stirrer uses a good pneumatic motor to use compressed air as the driving force of the working medium, and uses the expansion effect of compressed gas to convert pressure energy into mechanical energy, so as to realize the stirring and mixing of samples in the experimental environment.
Applications
Flammable and explosive material environment, high temperature environment, paints stirring, chemical stirring, solvent stirring
Steps
1. Connect the compressed air source
2. Choose the right Impeller as needed
3. Adjust the Cube Lifting Clamp to the appropriate height
4. Check the pressure value through the pressure gauge
5. Start Stirrer for stirring operation
Notice
• Please check whether the compressed air pressure is within the range of 0~ 6bar before use
• Ensure that the Ambient Temperature is within the range of 5~ 40 ° C
• The relative humidity should not exceed 80%
• Suitable for liquids with maximum viscosity ≤ 5000cp
• Pay attention to choosing the appropriate Impeller type and specification
• Please ensure that the clamping is stable during operation to ensure smooth operation
