Overview
HJQ-2 pneumatic Stirrer is a power device that uses pneumatic motor to use compressed air as the driving force of the working medium and converts pressure energy into mechanical energy by the expansion of compressed gas to realize the stirring and mixing of samples in the experimental environment. Especially suitable for stirring paints, chemicals, solvents, etc. with flammable and explosive substances or high temperature environments.
Features
1. Small Size, High Power, Safe and Light Operation
2, with high rotational torque, can start with load
3. Standard pressure gauge, you can check the pressure value at any time
4. Imported self-locking chuck with self-locking function, high concentricity and long service life
5. The Cube lifting and fixing clip adopts double-hole mode, the height can be adjusted arbitrarily, and the clamping is stable, making the operation more stable
6. The whole machine adopts explosion-proof, no spark, no static electricity pneumatic motor, safe operation, not easily affected by external environmental factors
7. Impellers of various specifications are available
Principle
The pneumatic motor uses compressed air as the driving force of the working medium, adopts the expansion of the compressed gas, and converts the pressure energy into mechanical energy, so as to realize the stirring and mixing of the samples in the experimental environment.
Applications
Stirring of paints, chemicals, solvents, etc. in flammable and explosive substances or high temperature environments
Steps
1. Connect the compressed air source
2. Select the appropriate Impeller according to your needs and install it
3. Adjust the Cube Lifting Fixing Clip to the appropriate height
4. Check the pressure value through the pressure gauge
5. Start Stirrer for stirring operation
Notice
Make sure the compressed air pressure is within the range of 0 to 6 bar before use
• Operating Ambient Temperature should be maintained between 5 and 40 ° C
• relative humidity should not exceed 80%
• Maximum viscosity should not exceed 5000cp
• When selecting an Impeller, the appropriate type and specification should be selected according to the characteristics of the medium
• Check whether the self-locking chuck is firm before operation
• Pay attention to the installation direction and fixing method of the Impeller
