Overview
HJQ-2 pneumatic Stirrer is a power device that uses pneumatic motor to use compressed air as the driving force of the working medium and converts pressure energy into mechanical energy by the expansion of compressed gas to realize the stirring and mixing of samples in the experimental environment. Especially suitable for stirring paints, chemicals, solvents, etc. with flammable and explosive substances or high temperature environments.
Features
1. Small Size, High Power, Safe and Light Operation
2. With high rotational torque, it can be started with load
3. Standard pressure gauge, you can check the pressure value at any time
4. Imported self-locking chuck with self-locking function, high concentricity and long service life
5. Cube lifting fixed clip adopts double hole mode, the height can be adjusted arbitrarily, the clamping is stable, and the operation is more stable
6. The whole machine adopts explosion-proof, no spark, no static electricity pneumatic motor, safe operation, not easily affected by external environmental factors
7. Impellers of various specifications are available
Principle
The HJQ-2 pneumatic Stirrer uses a pneumatic motor to use compressed air as the driving force of the working medium, and uses the expansion of the compressed gas to convert pressure energy into mechanical energy, so as to realize the stirring and mixing of samples in the experimental environment.
Applications
Mixing of flammable and explosive substances, stirring in high temperature environment, stirring of paints, stirring of chemicals, stirring of solvents
Steps
1. Connect the compressed air source
2. Select the appropriate Impeller and install it as required
3. Adjust the Cube Lifting Clamp to the appropriate height
4. Check the pressure value through the pressure gauge
5. Start Stirrer for stirring operation
Notice
• Ambient Temperature should be kept within 5~ 40 ℃
• relative humidity should not exceed 80%
• Maximum viscosity should not exceed 5000cp
• Ventilation pressure range from 0 to 6 bar
• When using, pay attention to the matching of Impeller type and medium viscosity
• Check whether the pressure gauge value is normal before operation
