Overview
HJQ-2 pneumatic Stirrer is a power device that uses a pneumatic motor to use compressed air as the working medium and converts pressure energy into mechanical energy through gas expansion to realize the stirring and mixing of samples in the experimental environment. It is especially suitable for stirring paints, chemicals, solvents, etc. in flammable and explosive substances or high temperature environments.
Features
1. Small Size, High Power, Safe and Light Operation
2. With high rotational torque, can start with load
3. Standard pressure gauge, check the pressure value at any time
4. Imported self-locking chuck with self-locking function, high concentricity and long service life
5. Cube lifting fixed clip adopts double hole mode, the height can be adjusted arbitrarily, the clamping is stable and the operation is smooth
6. The whole machine adopts explosion-proof, no spark, no static electricity pneumatic motor, safe operation, not easy to be affected by the external environment
7. Multiple Specifications Impeller Available
Principle
The pneumatic motor uses compressed air as the driving force of the working medium, adopts the expansion of the compressed gas, and converts the pressure energy into mechanical energy, so as to realize the stirring and mixing of the samples in the experimental environment.
Applications
Stirring and mixing of flammable and explosive substances such as paints, chemicals, solvents, etc., or in high temperature environments
Steps
1. Connect the compressed air source
2. Select the appropriate Impeller and install it as required
3. Adjust the Cube Lifting Clamp to the appropriate height
4. Check the pressure value through the pressure gauge
5. Start Stirrer for stirring operation
Notice
Make sure the compressed air pressure is within the range of 0 to 6 bar before use
• Operating Ambient Temperature should be maintained between 5 and 40 ° C
• environment relative humidity should not exceed 80%
• The viscosity of the stirring medium should not exceed 5000cp
• Ensure that the Impeller is firmly installed to avoid loosening during operation
Special attention should be paid to safety when used in flammable and explosive environments
