Overview
CHNSPEC CR10 is a Portable Colorimeter with a 45 °/0 measurement structure, equipped with a full-band equalized LED Illuminant, the measurement diameter is φ 4mm, and the Wavelength range covers 400~ 700nm. The device has no screen design, supports USB and Bluetooth Interface, can be continuously measured 5000 times on a single charge, weighs about 75g, and is small and easy to carry.
Features
1. Adopt 45 °/0 measurement structure to ensure measurement accuracy
2. Full Band Balanced LED Illuminant, Provide Stable Illumination
3. The measurement diameter is φ 4mm, suitable for small area measurement
4. Support a variety of measurement indicators, including RGB, Hex, Lab, LCh, HSB, LRV, CMYK, etc
5. High Accuracy measurement, Short-term Repeatability Delta E * 00 ≤ 0.1, Inter-instrument Agreement Delta E * 00 < 0.5
6. Fast Measurement time only 1.0s
7. Support USB and Bluetooth Dual Interface
8. Multiple Available Light Sources and Angle Options
9. No screen design, operated through APP
10. Battery life is long, single charge can be measured 5000 times
11. Support multilingual and Automatic calibration
12. Compatible with multiple Software platforms, including Android, IOS, WeChat Mini Program, Windows
Principle
CHNSPEC CR10 spectrophotometry based on Spectrophotometric method, spectra-trophotometry principle, using 45 °/0 Optical inspection structure, LED full-band Balanced Illuminant irradiation sample, by measuring the reflected light in the 400~ 700nm Wavelength range of Light spectrum distribution, calculated a variety of Color indicators. The device transmits data to the supporting APP through USB or Bluetooth for processing and display.
Applications
Color measurement, quality control, product development, material testing, printing, Spinning & weaving, Coatings, Plastics, Cosmetics
Steps
1. Connect the device to the mobile phone or computer APP through USB or Bluetooth.
2. Open the supporting software and select the corresponding function
3. Align the device measurement port to the surface of the sample to be tested
4. Press the measurement button for measurement
5. View measurement results and data in the APP
6. Different Available Light Sources and Angles can be selected as needed
7. Data can be saved or exported after measurement
Notice
• Ensure equipment is calibrated before measurement
• Keep the measurement port clean to avoid contamination affecting accuracy
• Make sure the device is in vertical contact with the sample surface during measurement
• Perform measurements in a stable light environment
• Regular charging to ensure battery performance
• Use the supporting APP for operation and data management
• Avoid equipment from being violently hit or dropped
