Overview
YIHENG BPN-150CRH Co2 incubator is a new generation product. It combines more than ten years of design and manufacturing experience of the company, is oriented to customer needs, and adopts advanced technology to represent the development trend of the industry. Equipped with imported infrared CO2 Sensor, the control accuracy is accurate and stable, and it is not affected by temperature and Humidity.
Features
1. Faster CO2 concentration recovery speed, the door is closed after 30 seconds, the CO2 concentration returns to 5% of the set value in less than 5 minutes, and the temperature returns to 37 ° C in less than 10 minutes.
2. Equipped with Microbial Effective Filter, the filtration efficiency of particles with a diameter of ≥ 0.3μm is 99.99%, effectively filtrating bacteria and dust in CO2 gas.
3. Glass door heating system to prevent condensation and avoid microbial contamination.
4. The circulating fan speed is automatically controlled, and the wind speed is adjusted according to the temperature state to avoid sample volatilization.
5. HEPA Effective Filter eliminates cross-contamination between outside air and the box. After the box door is closed for 5 minutes, it returns to the 100-level clean level, and it is easy to disassemble and assemble without tools.
6. Humanized design, can be stacked (two layers), large-screen LCD display temperature, CO2 concentration, relative humidity, menu Operating interface is simple and easy to understand.
7. Safety functions include independent temperature limit alarm system, sound and light alarm, temperature high/low/over-temperature alarm, CO2 concentration high/low alarm, door opening time is too long alarm and UV sterilization status reminder.
8. Microcomputer controller, PID control, display Multi-Parameter and fault prompt simultaneously.
9.90 ℃ high temperature heating and humidity sterilizing system, effectively eliminate bacteria, mold, mycoplasma and other microbial pollution.
10. Data recording and fault diagnosis display (optional), download data through RS485 port.
Principle
Microcomputer PID control technology is used to monitor the CO2 concentration in the box through imported infrared CO2 Sensor, which is not affected by the fluctuation of external temperature Humidity. The speed of the circulating fan is automatically adjusted to reduce the wind speed in the thermostatic state to adapt to cell growth. HEPA and Microbial Filter effectively filtrate bacteria and dust and maintain the sterile environment in the box. Door temperature heating system prevents the formation of condensate, high temperature heating and humidity sterilizing system eliminates microbial pollution.
Applications
Cell fostering, microbiological experiments, biomedical research, laboratory fostering
Steps
1. Connect the power supply, voltage AC220V/50Hz.
2. Set the temperature, CO2 concentration and other parameters through the large LCD screen.
3. Operating interface for control and monitoring.
4. Optional data recording function, download data through RS485 port.
5. Carry out 90 ℃ high temperature heating and humidity sterilizing operation (if necessary).
Notice
• Ambient Temperature should be in the range of + 5~ 30 ℃.
• Avoid frequent door opening affecting CO2 concentration and temperature recovery.
• Regularly check and maintain HEPA Filter to ensure filtrate efficiency.
• Use an independent temperature limit alarm system and pay attention to sound and light alarm prompts.
• Pay attention to the alarm when the door is open for too long to prevent pollution.
• Ensure safe operation during high temperature heating and humidity sterilization.
• Optional wireless alarm system to enhance security monitoring.
