Overview
YIHENG BPN-240CRH Co2 incubator is a new generation of products, combining more than ten years of design and manufacturing experience, oriented to customer needs, using imported infrared CO2 Sensor, accurate and stable control accuracy, not affected by temperature and Humidity, representing the development trend of Co2 incubator.
Features
1. Faster CO2 concentration recovery speed, after opening the door for 30 seconds, the door can be restored to 5% of the set CO2 concentration in less than 5 minutes, and it can be restored to 37 ° C in less than 10 minutes.
2. Equipped with Microbial Effective Filter, the filtration efficiency of particles with a diameter of ≥ 0.3μm is 99.99%, effectively filtrating bacteria and dust in CO2 gas.
3. Glass door heating system can prevent condensation and avoid microbial contamination.
4. The circulating fan speed is automatically controlled, and the wind speed is adjusted according to the temperature state to avoid sample volatilization.
5. HEPA Effective Filter, which can filtrate external bacteria and dust, prevent cross-contamination, restore 100-level cleanliness after the box door is closed for 5 minutes, easy to disassemble and assemble.
6. Humanized design, can be stacked (two layers), large-screen LCD display temperature, CO2 concentration, relative humidity, menu Operating interface is simple and easy to understand.
7. Safety functions, including independent temperature limit alarm system, sound and light alarm, temperature high/low/over-temperature alarm, CO2 concentration high/low alarm, door opening time is too long alarm and UV sterilization status reminder.
8. Microcomputer controller, PID control, and display Multi-Parameter simultaneously.
9.90 ℃ high temperature heating and humidity sterilizing system can effectively sterilize the inner chamber and eliminate microbial pollution.
10. Data recording and fault diagnosis display (optional), download data through RS485 port.
Principle
Imported Infrared CO2 Sensor is used for monitoring, with high control accuracy and is not affected by temperature Humidity. Microbial Filter and HEPA Filter filtrate gas and air to prevent pollution. Circulation fan speed is automatically adjusted to maintain a suitable environment. Door heating system prevents condensation. Microcomputer PID controller precisely adjusts temperature and CO2 concentration to ensure a stable environment in the incubator.
Applications
Cell fostering, microbial experiments, biomedical research
Steps
1. Connect the power supply and turn on the device.
2. Set the temperature, CO2 concentration and other parameters through the large LCD screen.
3. Place the sample and close the box door.
4. Monitor changes in parameters on the display to ensure stability.
5. After use, optional 90 ℃ high temperature heating and humidity sterilizing system for interior cleaning.
6. Optional function: Download data through RS485 port or use wireless alarm system.
Notice
• Ambient Temperature should be kept at + 5~ 30 ℃.
• Avoid opening doors frequently to maintain CO2 concentration and temperature stability.
• Regularly check Filters and Sensors to ensure they are functioning properly.
• When using the alarm system, pay attention to sound and light prompts and deal with abnormalities in a timely manner.
• Do not exceed two layers when stacked to ensure safety.
• Wait to chill down after sterilizing to prevent burns.
