Overview
YIHENG BPN-500CRH Co2 incubator is a new generation product. It combines more than ten years of design and manufacturing experience of the company, is oriented to customer needs, and adopts new technology to represent the development trend. Imported infrared CO2 Sensor is adopted, and the control accuracy is accurate and stable, and it is not affected by temperature and Humidity.
Features
1. Faster CO2 concentration recovery speed, after opening the door for 30 seconds, the door can be restored to 37 ° C in less than 10 minutes, and the set CO2 concentration can be restored to 5% in less than 5 minutes.
2. Imported Infrared Sensors monitor carbon dioxide gas quickly and are not affected by fluctuations in external temperature and Humidity.
3. The CO2 inlet is equipped with a microbial Filter, which has a filtration efficiency of up to 99.99% and effectively filtrates bacteria and dust particles.
4. Glass door heating system to prevent condensation and avoid microbial contamination.
5. The circulating fan speed is automatically controlled to adjust to the wind speed suitable for cell growth to avoid sample volatilization.
6. HEPA Effective Filter, can filtrate external bacteria and dust, to prevent cross-contamination, the door closed 5 minutes after the return to 100 clean level, easy to disassemble.
7. Humanized design, stackable, large LCD screen, Menu Operating interface.
8. Safety functions include independent temperature limit alarm system, sound and light alarm, temperature and CO2 concentration alarm, door opening time is too long alarm and ultraviolet sterilization reminder.
9. Microcomputer controller, PID control, display temperature, CO2 concentration, relative humidity, etc.
10.90 ℃ high temperature heating and humidity sterilizing system, effectively eliminate bacteria, mold, mycoplasma and other microbial pollution.
11. Data recording and fault diagnosis display (optional), download data through RS485 port.
Principle
The Co2 incubator adopts microcomputer PID control technology to monitor and adjust the CO2 concentration in the box through imported infrared CO2 Sensor, which is not affected by temperature and Humidity. The circulating fan automatically adjusts the wind speed to maintain the thermostatic state. Equipped with Microbial Filter and HEPA Filter to ensure clean air. Door temperature heating system prevents condensation, high temperature heating and humidity sterilizing system eliminates microbial pollution.
Applications
Cell fostering, microbial experiments, biomedical research
Steps
1. Connect the power supply and turn on the device.
2. Set the temperature, CO2 concentration and other parameters through the large LCD screen.
3. Operating interface for control and monitoring.
4. Optional RS485 interface to download data or perform fault diagnosis.
5. Perform high temperature heating and humidity sterilizing operation (if required).
Notice
• Ensure that the Working Ambient Temperature is within the range of + 5~ 30 ° C.
• Avoid frequent door opening affecting CO2 concentration and temperature recovery.
• Regularly check and replace the HEPA Filter.
• Pay attention to alarm prompts and deal with abnormal situations in a timely manner.
• Make sure the CO2 Intake Filter is intact before use.
• Do not exceed two layers when stacked to ensure stability.
• Follow safety features to prevent accidents.
