Overview
The new generation BPN series Co2 incubator is an upgraded product of the original HH · CP series, using infrared CO2 Sensor, the control accuracy is accurate and stable, and it is not affected by temperature and Humidity. The product model is BPN-30CW (UV), the brand is YIHENG, and the product name is Co2 incubator.
Features
1. Humanized design: stackable placement (two layers), microcomputer LCD controller, stainless steel liner and shelf, four corners and half arc transition, shelf bracket can be freely loaded and unloaded.
2, Infrared Sensor: monitoring carbon dioxide gas speed, not affected by external temperature Humidity fluctuations, keep the CO2 concentration in the box stable and uniform.
3. Microbial Effective Filter: The CO2 air inlet is equipped with a Filter, which has a penetrating efficiency of 99.99% for particles with a diameter of ≥ 0.3 μm, effectively penetrating bacteria and dust particles.
4. Automatic control of circulating fan speed: The fan speed is automatically adjusted, and the wind speed is reduced when thermostatic to avoid sample volatilization.
5. Door heating system: Glass door heating inside the box door to prevent condensation and microbial contamination.
6. Safety function: independent temperature limit alarm system (optional), low temperature, high temperature, over-temperature alarm and long door opening time alarm.
7. Ultraviolet sterilization system: The ultraviolet sterilization lamp is located at the top and back of the box, and is regularly disinfected to kill the floating bacteria of circulating air and humidifying pan water vapor to prevent pollution.
Principle
The infrared CO2 Sensor is used to monitor the carbon dioxide concentration in the box, with high control accuracy and is not affected by temperature Humidity. The circulating fan speed is automatically adjusted to ensure uniform temperature and sample safety. The door temperature heating system prevents condensation, the ultraviolet sterilization system regularly disinfects the internal environment, and the microbial Filter filtrates impurities in the CO2 gas.
Applications
Cell fostering, microbial experiments, biomedical research
Steps
1. Connect the power supply and turn on the device.
2. Set temperature and CO2 concentration parameters.
3. Place the sample and close the box door.
4. Monitor the operating status of the equipment and perform UV disinfection if necessary.
Notice
• Avoid opening doors frequently to prevent fluctuations in CO2 concentration.
• Regularly clean liners and shelves to prevent contamination.
• Check Microbial Filter status before use to ensure filtrate efficiency.
• Pay attention to Ambient Temperature and Humidity requirements to avoid exceeding the range.
• When using UV sterilization, make sure no one is exposed to UV offline.
• Optional safety features such as an independent temperature limit alarm system to enhance safety.
