Overview
Thermostatic Shaker HZQ-300AC (single layer) integrates more than ten years of design and manufacturing experience, introduces and digests foreign technologies, and continuously innovates with user request-oriented technology. The product integrates incubator and Shaker, and is widely used in cell fostering, fermentation, hybridization, biochemistry and cell tissue research that require high temperature and Oscillation Frequency, especially suitable for laboratory pilot production.
Features
1. Humanized design: the incubator and Shaker are integrated into a small container, which can be automatically converted to an incubator after the experiment; the large-screen LCD screen is easy to operate; the operation is quiet; the fluorine-free design; the large-screen tempered thermal insulation observation window; a variety of special cradle fixtures are easy to replace; 304 stainless steel liner is easy to clean; the left side of the box is equipped with a 25mm test hole
2. Quality assurance: automatic storage parameters after power failure, restore the original program after power on; Microcomputer PID control temperature and Oscillation Frequency with timing function; brand Compressor and circulating fan, environmentally friendly without fluorine refrigerant
3. Continuous operation guarantee: low heat dissipation DC motor starting torque, large speed regulation, maintenance-free, can run continuously for a long time
4. Safety functions: door switch protection, door opening automatically stop cycle heating and Shaker; smooth start to prevent liquid splashing; independent temperature limit alarm system over temperature automatically cut off heating; automatic control of circulating fan speed to prevent sample volatilization; optional RS-485 and USB interface
5. Self-diagnosis function: The LCD screen displays fault information when the fault occurs
6. Multi-stage programmable control (optional): multi-stage temperature, speed and time synchronization programming to simplify complex foster requirements
7. Convenient data processing (optional): can be connected to a printer or 485 interface to record temperature and time Linear dispersion
8. UV sterilization system: The UV Lamp in the box is regularly disinfected to effectively prevent cell fostering pollution
Principle
Microcomputer PID control technology to precisely control the temperature and Oscillation Frequency, through the DC motor drive to achieve smooth oscillation, combined with a circulating fan to ensure uniform temperature. With automatic program control and data monitoring functions to achieve thermostatic oscillation foster.
Applications
Cell fostering, fermentation, hybridization, biochemical research, cell tissue research, laboratory pilot production
Steps
1. Connect the power supply and turn on the device.
2. Set Temperature, Oscillation Frequency and Time Parameters via LCD Menu
3. Place the sample and start the operation
4. The device can automatically switch to incubator mode after the experiment
5. Optional function: multi-stage programming or data recording
Notice
• Automatic stop cycle heating and Shaker when the box door is opened, please do not force operation
• Pay attention to the independent temperature limit alarm system, overheating will automatically cut off the heating
• When replacing the cradle and fixture, please follow the specifications
• Regularly use the UV sterilization system for box disinfection
• Avoid liquid splashing to prevent instrument damage
• Please follow the instructions when using the optional interface
