Overview
HZQ-3221 (single layer) shaker is YIHENG brand open oscillation equipment, can run continuously for a long time, is widely used in the Oscillation Frequency has high requirements of cell foster, fermentation, hybridization, biochemistry and cell tissue research, can be microbial cells and various species of movement, static foster, especially suitable for pilot and mass production.
Features
1. Humanized design: Quiet operation, large-screen LCD display with multiple sets of data displayed on one screen, Menu Operating interface is simple and easy to understand, oscillating countertop is made of stainless steel material for easy removal and cleaning, a variety of special cradles and fixtures are available for replacement, easy to improve work efficiency
2. Quality assurance: User-set parameters are automatically stored in the event of a sudden power outage and run the original setting program after power on, using microcomputer-controlled Frequency with timing function and mild oscillation start function to prevent sample spillage, uniquely designed Rotation speed monitoring circuit Stop oscillation when Rotation speed is too fast or too slow to ensure safe operation
3. Continuous operation guarantee: low heat dissipation brushless DC motor with large starting torque, wide speed regulation, and maintenance-free, breaking through the defects that China shaker cannot operate continuously for a long time
4. Three eccentric shaft equilibrating drive: ensure that the sample oscillates at the same Rotation speed, load-bearing durable structure design to ensure strong Power under full load and high speed
5. Multi-Segment Programmable Control (Optional): Multi-Segment Oscillation Frequency, Time Synchronous Programming, Ordinary and Programmed Operating Modes Optional, Preset and Operating Values Simultaneously Display Simplified Complex Foster Requirements for Automatic Control
Principle
The shaker ensures that the sample on the oscillation tray oscillates at the same Rotation speed through the equilibrate drive process of the three eccentric shafts, the microcomputer controls the Frequency and Rotation speed monitoring circuit, the mild oscillation start function prevents the sample from spilling, and the low heat dissipation brushless DC motor provides stable power to support long-term continuous operation.
Applications
Cell fostering, fermentation, hybridization, biochemistry, cell tissue research, static fostering of microbial cell and strain movement, pilot test, mass production
Steps
1. Turn on the power supply AC220V 50HZ
2. Set Oscillation Frequency (40~ 300rpm), Time and other parameters through the large-screen LCD menu Operating interface
3. Select normal or programmed operation mode (such as optional multi-stage programmable control)
4. Place the sample on the oscillating tray, selecting the cradle and fixture as required
5. Start the device, and the mild oscillation start function will run automatically
6. Monitor the operating status, the device automatically stores parameters and stops oscillating when abnormal
Notice
• Power supply voltage AC220V 50HZ
• Oscillation Frequency setting range is 40~ 300rpm, avoid exceeding the range
• Check whether the cradle and fixture are firmly installed before use
• Remove the stainless steel oscillating countertop for cleaning when cleaning
• Avoid forced operation when Rotation speed monitoring circuit alarm
• Pay attention to the heat dissipation of the equipment when running continuously for a long time
