Overview
YIHENG MPGE-20C low temperature circulating water tank is a new generation of constant temperature water bath system, integrating the company's many years of design and production experience, the introduction of digestion of German technology, the main parts are imported products, with high quality, reliability, stability and other characteristics, widely used in petroleum, chemical, life science, Measurement, light industry and scientific research and other fields.
Features
1. Intelligent microcomputer temperature LCD controller, high temperature control accuracy, environmentally friendly refrigerant, Compressor, circulating pump and heating device and other key components are imported products.
2. Over-temperature, low-temperature sound and light tracking alarm and liquid level protection functions ensure that samples are reliably protected without accidents.
3. Using imported brand Compressor, it has the characteristics of low noise, fast cooling, high efficiency and low energy consumption.
4. Equipped with a powerful pressure suction pump to provide a thermostatic source for the peripheral groove.
5. Equipped with a connecting port for external bath.
6. Can be connected to a printer, 485 Communication interface or USB data transfer interface (U disk), use a computer and printer to record temperature and time Linear dispersion, providing a strong guarantee for data storage and playback during the test.
7. Microcomputer program controls temperature, time and heating rate, and conducts thermostatic test at extremely fast speed.
8. 7 sets of 63 steps can be preset, each set time is 1-99 hours and 59 minutes, and the Rotation speed of the circulating pump can be adjusted.
Principle
The device precisely controls the temperature through an intelligent microcomputer temperature LCD controller, and uses imported Compressors, circulation pumps and heaters to work together to achieve rapid cooling and thermostatic. The powerful pressure suction pump provides a thermostatic source for the peripheral groove, and presets temperature and time parameters through multi-stage programmable functions to ensure efficient and stable thermostatic circulation.
Applications
Petroleum, Chemical, Life Science, Measurement, Light Industry, Scientific Research
Steps
1. Connect the power supply and ensure that the voltage is AC220V50HZ.
2. Fill with an appropriate amount of liquid, and the filling volume is about 13L.
3. Temperature range (-20~ 100 ℃), time and heating rate are set by microcomputer LCD controller.
4. Optional preset 7 sets of 63 steps can be programmed, and each set of time is set to 1-99 hours and 59 minutes.
5. Adjust the Rotation speed of the circulating pump and start the equipment for thermostatic test.
6. Optional connection to a printer or computer interface to record data.
Notice
• Power supply voltage check before use in accordance with AC220V50HZ requirements.
• Make sure that the filling volume does not exceed 13L to avoid overflow.
• Pay attention to the over-temperature and low-temperature alarm functions, and deal with abnormal situations in a timely manner.
• Maintain critical components such as Compressors, circulation pumps and heaters regularly.
• Follow equipment safety regulations during operation to prevent accidents.
